Here is a prong fabrication tip from @wendyjonewmetaldesigns - “While fabricating a pair of earrings one day, I decided to use my @pepetools_usa Ring Bender with one of the angle inserts to fabricate my prong settings. As you can see in the photo, I used the 60 degree one. It proved to be a very fast, very successful way to quickly bend my gold wire that resulted in prong components with the same, precise angles. I placed them opposite each other along a straight piece of wire and soldered them together to make 6 prong settings for the stones I wanted to set. A 4 prong setting could just as easily be fabricated this way by soldering two “V”s together at the points.” Thanks for creating this video for us Wendy! This is such a great technique and we appreciate you!